When pv magazine visited Solar Impulses vast hangar in Switzerland on a bright fall day back in 2014, a veritable shower of facts and figures poured forth from the presentations given by the aircrafts pilots, Andre Borschberg and Bertrand Piccard. But amid the eyebrow-raising, record-breaking stats, one seemingly throwaway comment stood out: if the Solar Impulse 2 (si2) aircraft was made totally out of paper, it would actually be heavier than it is. The thousands of new patents filed during the planes design and creation was proof if proof were needed: this flight, if it was going to be a success, would be supremely dependent on weight.
Cue a few lighthearted jokes about the pilots forthcoming diet regimes, followed by the most obvious question: which components are proving the weightiest? The answer was the four lithium batteries, two to each wing.
Capable of storing 164,580 watts of power, the batteries with cells developed by South Korean storage specialists Kokam were key to the success of the operation, storing the solar energy harvested by the 17,000 solar cells to enable the aircraft to fly at night. But with a combined weight of 633 kg, they represented one-quarter of the aircrafts total bulk an obvious area for improvement next time out, perhaps?
"Typical lithium-battery sizing is between 10 to 50 AMP hours for a single cell," Ike Hong, Kokams VP of power solutions division, told pv magazine. "So what we wanted to do for Solar Impulse was to minimize the number of cells required. We developed a large format battery, so one single cell was 150 AMP hour. That was the single biggest lithium polymer battery ever at the time, back in 2008-9 when we first began working with Solar Impulse. The second approach we took was to increase energy density, meaning that within the small space available the goal was to put much more energy.
"At the time, typical lithium-ion energy density was 150 watt hour (wh) per kilogram (kg), but we were able to provide for Solar Impulse a 260 wh/kg battery an almost 100% improvement on the industry standard at that time, which by now was 2009-2010.
"This is a high capacity and high energy density battery, which took a few years development for the Solar Impulse project, and now we are using this battery for military UAV industry unmanned aircraft."
How the relationship came about is an interesting, chicken-and-egg story. Did Kokam develop such batteries in response to the demands of the Solar Impulse project, or were Solar Impulse drawn to Kokam after hearing about their work?
"There is now a long history between us," Hong said. "Solar Impulse contacted Kokam back in 2007-8 for the first stage of the project. During this stage, Solar Impulse contacted many different companies to see who could support them in their needs. We worked with Solvay, who did the battery packing, while Kokam produced the cell. This collaboration bore the fruit of the battery system."
And so the relationship was born, the aircraft tweaked and primed, and the take-off date arrived. All was going smoothly until Borschberg touched the plane down in Hawaii last July following the longest leg yet a five-day, non-stop flight from Japan. Upon landing, the team learned that the batteries had overheated. Decisions had to be made.
"After the Solar Impulse aircraft flew longer than the team had expected, the batteries became a little overheated. We had to discuss with Solar Impulse the state of the batteries, whether they were in a good state or not," revealed Hong. "This was not something that could be quickly assessed and resolved, and so we took the decision to ship the batteries back to Germany to test them. In general, Kokam had some confidence that the batteries would be fit to fly. But obviously, due to the importance of the Solar Impulse flight, and the media attention, even a 1% chance of failure was too much."
The batteries were actually found to be undamaged, but it was felt at the time that the best solution would be to delay the flight. "It was an unavoidable decision for everybody concerned," Hong said, revealing that during the nine-month delay the teams worked on a more efficient cooling system for the batteries. "This was a good learning curve in terms of battery cooling and performance under stress. Prior to that point the batteries had been performing optimally."
From then on, plane-sailing was resumed, and following the successful touchdown in Abu Dhabi last month, questions quickly turned to: Whats next?
"Weight is still a key issue for our attention. To fly for hundreds of hours without landing is a real challenge. There are many types of industries interested in how solar+battery applications can deliver non-stop energy. Progress will come from much lighter, but very high energy lithium batteries with high energy density. As this is achieved, greater possibilities for non-stop solar-powered flight open up. Safety is also paramount for these types of applications," said Hong.
"Following the Si2 project we are now looking at different aviation programs, including the military. The next step will be finding ways to carry more passengers, and to do this we have to increase the energy density in the safest and most cost-effective way possible."
The progress made during the flight is also set to deliver progress in stationary storage systems, Hong added. Smaller, more compact storage is always in demand from the industry. Whether in houses, commercial buildings etc, real estate pricing pressures mean space is increasingly at a premium.
"Compact, aesthetically pleasing and higher density batteries will win the day, so what Kokam is doing is taking some technology that we developed for Si2 and building utility-scale and behind-the-meter storage systems at much more compact models, but with improved energy density. We are putting 30-40% more capacity than typical lithium-ion batteries on the market, within a 40ft container or the same battery pack space in the home. This is the undoubted advantage gained from our work with the Solar Impulse project."
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.