Skip to content

US company develops robotic solution to address installer shortage

Sarcos has designed a robotic PV construction solution that delivers, detects, lifts, and places PV modules in large-scale solar plants. It has recently field tested and validated the prototype solution in a pilot project funded by the US Department of Energy.

1

Seasonal hydrogen storage for residential self-consumption

Finnish and German researchers have assessed the role of seasonal hydrogen storage for PV prosumer households with a “least-cost” model at a global level up to 2050. They have found that seasonal hydrogen storage can only be expected in a niche, off-grid market.

3

Hydrogenated amorphous silicon solar cell for BIPV, bifacial applications

Scientists in South Korea have developed a flexible, transparent solar cell with an average visible transmittance (AVT) of 88.3%. They have also created an n-type rear window layer to optimize bifacial operation.

How to combine offgrid PV, heat pumps, and fuel cells in residential complex

Finnish researchers have studied different scenarios to convert a Nordic oil-heated townhouse into a carbon-neutral building. They dimensioned an off-grid PV-powered heat pump system using waste heat recovery from a hydrogen storage system and calculated its life-cycle cost. They concluded that the solution is less profitable than grid-connected systems.

2

Cadmium telluride PV windows for domestic hot water production

Romania-based startup Photovoltaic Windows has developed an off-grid domestic hot water system powered by cadmium telluride (CdTe) photovoltaic semi-transparent glasses. It claims a 0.7 kW pilot installation on an apartment balcony in Bucharest resulted in annual savings of €1,100 ($1,202).

2

Triple junction perovskite solar cell hits 24.3% efficiency

An international research group created a triple-junction perovskite solar cell with an efficiency of 24.3% and a quasi-steady-state efficiency of 23.3%. The prototype cell, which has been independently certified by the US National Renewable Energy Laboratory (NREL), features rubidium/cesium mixed-cation inorganic perovskites with a bandgap of around 2.0 eV to suppress light-induced phase segregation.

2

Daikin starts building heat pump factory in Poland

Daikin has started building its first heat pump factory in Lodz, Poland. The Japanese heating manufacturer will invest €300 million ($327.2 million) in the new facility, which is expected to start operations in July 2024.

1

Town in Cyprus kicks off tender for 2.96 MW solar plant

The municipality of Aradippou, Cyprus, says it is looking for developers to build a 2.96 MW solar plant. The deadline for bids is May 12.

Dutch city installs solar footpath

Hungary’s Platio has inaugurated a solar footpath in the Dutch city of Groningen. The installation consists of 2,544 monocrystalline Patio solar pavers with a 21.8% efficiency rating. It will generate 55,000 kWh of electricity per year and can purportedly withstand a pressure of 2 tons without microcracks.

6

LG reveals plans for US heat pump factory

LG Electronics North America has revealed plans to manufacture 100% electric heat pumps in the United States for the first time.

1

This website uses cookies to anonymously count visitor numbers. View our privacy policy.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close