Aquion Energy enters 1 MWh battery supply deal in Hawaii

Share

The off, micro and edge-of-grid applications for medium and large-scale battery storage market continues to grow. The latest announcement from the sector comes courtesy of Pittsburgh headquartered Aquion Energy in the form of a 1 MWh storage solution in Hawaii.

The battery system will store on-site solar electricity and will allow the Bakken Hale residential estate to operate entirely free from utility grids.

The microgrid system is being developed by Renewable Energy Services, which will couple the 1 MWh Aquion battery with a 176 kW solar array. A propane-fueled generator will provide emergency backup power.

The Aquion battery system will charge on an eight-hour cycle during daylight hours, with a 16-hour discharge cycle. Aquion says its aqueous hybrid ion technology is well suited for such long-duration charge and discharge cycles.

"The Bakken Hale project is the first of several very large microgrid projects we plan to supply using our M-Line Battery Modules,” said Scott Pearson, Aquion CEO. “We look forward to working with RES to install this system and showcase our capabilities to the Hawaiian market." The estate owner, Medtronic, indicated that the PV-plus-storage array will help the residential community to reduce its fossil fuel usage by 97%.

"I want to demonstrate that using a solar and battery-powered microgrid is our best solution now,” said Earl Bakken, founder of Medtronic. “This installation will enable us to meet our around-the-clock power needs with solar generation.”

Aquion reports that its manufacturing operations, based in Mt. Pleasant, Pennsylvania, has the capacity to produce 200 MWh annually. It aims to expand that capacity to 1 GWh.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.

Popular content

Daikin launches air-to-water heat pumps for single-family homes

16 December 2024 Daikin has released a line of residential heat pumps, using propane (R290) as the refrigerant, with outdoor unit dimensions of 1,122 mm x 1,330 mm x 6...

Share

Leave a Reply

Please be mindful of our community standards.

Your email address will not be published. Required fields are marked *

By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.

Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.

You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.

Further information on data privacy can be found in our Data Protection Policy.