Researchers at the Daegu Gyeongbuk Institute of Science and Technology (DGIST) in South Korea have developed a faradaic supercapacitor that can reportedly achieve high energy and power density thanks to transition metal-based electrode materials.
To build these electrodes, the scientists used a nickel-based carbonate and hydroxide composite material, which are said to optimize their conductivity and stability. They initially tested transition metal ions such as manganese (Mn), carbon monoxide (Co), copper (Cu), iron (Fe), and zinc (Zn) and found that the optimal nanostructure of the electrodes depended on the transition metals used.
“Electrodes with optimal electrochemical properties were obtained depending on the choice of transition metals,” they explained noting that, among the synthesized binary metal compounds, a compound made of Ni, Co, hydroxide (OH) offered the best performance, with a capacity retention rate of 87.1 % after 5,000 cycles.
The proposed system consists of a solar cell, a current collector plate, a gasket, the proposed electrode, a cellulose paper layer, and a second current collector plate. It also includes a graphene layer as the anode.
The system achieved energy densities of 35.5 Wh/kg and 13.6 Wh/kg and power densities of 2,555.6 W/kg and 1,2262.5 W/kg at current densities of 2 A/g and 15 A/g, respectively. It also achieved an energy efficiency of 63% and an overall efficiency of 5.17 % under an illumination intensity of 10 mW cm2.
According to the researchers, the device's power density is significantly higher than that of similar devices, which usually do not exceed 1,000 W/kg. “The system demonstrates the ability to release higher power rapidly, enabling immediate energy supply even for high-power devices,” they explained. “Additionally, the performance showed minimal degradation during repeated charge and discharge cycles, confirming the long-term usability of the device.”
Looking forward, they are aiming for the implementation of high-performance supercapacitors and drive future-oriented research efforts. “We will continue to conduct follow-up research to further improve the efficiency of the self-charging device and enhance its potential for commercialization,” they stated.
The system was introduced in the study “Design of high-performance binary carbonate/hydroxide Ni-based supercapacitors for photo-storage systems,” published in Energy.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.