Chinese solar module manufacturer Longi unveiled last week a new module series based on its proprietary hybrid passivated back contact (HPBC) cell technology at the SNEC tradeshow in Shanghai, China.
The new Hi-MO X6 Artist panel is available in two versions dubbed Ultra Black and Full Black, which share the same electrical specifications.
The new products are sold with wattages ranging from 420 W to 430 W and power conversion efficiency spanning from 21.5% to 22.3%. The open-circuit voltage is between 39.45 V and 40.05 V and the short-circuit current is between 13.54 A and 13.77 A.
The modules have a temperature coefficient of -0.29%/C and a maximum system voltage of 1,500. Their size is 1,722 mm x 1,134 mm x 30 mm and their weight is 22.5 kg. They also feature IP68 junction boxes and 3.2 mm coated tempered glass.
The new products come with a 30-year linear power output warranty, with the 30-year end power output being guaranteed to be no less than 86.9% of the nominal output power.
The new modules are based on HPBC all-black cells and structured glass, which the manufacturer said ensures uniform light reflection in various directions. This feature guarantees a consistent black appearance without glare, regardless of the installation angle.
Unlike traditional solar modules priced by wattage, the Hi-MO X6 Artist is priced by square meter, facilitating easier alignment of the roof area with solar module size and simplifying cost calculations for homeowners. The version with a power output of 450 W is priced at CNY 298 ($41.7)/m2 and the 430W model is sold at CNY 268/m2.
Longi said that the Hi-MO X6 Artist module will enter mass production in the fourth quarter of this year and will be simultaneously available in all global markets.
In March, Longi launched its Hi-MO X6 Explorer and Hi-MO X6 Guardian modules. Later in late May, it presented the Hi-MO X6 Scientist panel. In June, it unveiled the Hi-MO 9 panel.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.