France announces dramatic PV tariff cuts

Share

The cuts are more severe than originally expected, and follow a three month moratorium, which stopped any PV projects larger than three kW from receiving approval.

In addition to a 500 megawatt (MW) annual cap on the market, the new tariffs for systems under 100 kWp in size will be reduced by around 20 percent. Furthermore, they will continue to be cut by an additional ten percent per quarter, meaning that by the end of 2011, they will have been reduced by a total of 40 percent.

In an even bigger blow to the industry, the new €0.12 per kWh rate for systems over 100 kW in size means that tariff cuts of around 70 percent will be implemented for PV rooftop installations. For other systems, it will mean a reduction of around 57 percent.

Responding to the announcement by the French Minister of the Environment yesterday, Götz Fischbeck, senior equity analyst for PV stocks at BHF Bank AG stated: "The new French tariffs could limit the new installations much stronger than the 500 MWp cap instated. Under the new tariffs we doubt that any PV system larger than 100 kWp will yield a positive return. Even for the smaller PV systems the quarterly digressions by 10 percent pose a high economical challenge."

He went on to say that although the construction and grid connection permits approved for a total of 3.4 gigawatts peak of PV systems prior to the December moratorium are still valid, it can be expected that over 60 percent will not be completed, as the new tariffs will make them "financially unattractive, if not impossible".

Industry figures are today gathering in front of Paris' Elysee-Palast to demonstrate against the cuts.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.

Popular content

Daikin launches air-to-water heat pumps for single-family homes

16 December 2024 Daikin has released a line of residential heat pumps, using propane (R290) as the refrigerant, with outdoor unit dimensions of 1,122 mm x 1,330 mm x 6...

Share

Leave a Reply

Please be mindful of our community standards.

Your email address will not be published. Required fields are marked *

By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.

Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.

You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.

Further information on data privacy can be found in our Data Protection Policy.